Acc. to ISO/IEC 11801 the fiber channels of duplex connectors are connected, i.e. channel termination A on the 1st side is connected to channel termination B on 2nd side.The channels A/B are marked by differently coloured cable boots (A=red, B=black).
FO patch cords are mainly used in patch panels or as connections between outlets and terminals. Duplex cables with duplex connectors prevent from changing transmission and reception lines. The quality of connectors and fibers used determines to a great degree the insertion loss and reflexion performance of the transmission line. Factory- assembled FO patch cables guarantee exceptional optical and mechanical characteristics and a long lifetime due to use of optimized components and a constantly controlled manufacturing process. Flame-retardant and halogen-free cable sheath material provides low environmental load.
|Calbe structure acc. DIN/VDE 0888||I-K(ZN)H 2×1 …|
|Cable dimensions in mm: Zipcord||2,8 x 5,7|
|Cable dimensions in mm: Minizip (2×0,6)||1,8 x 3,7|
|Max. pulling tension short-term/long-term in N: Zipcord||400 / 200|
|Max. pulling tension short-term/long-term in N: Minizip (2×0,6)||400 / 200|
|Max. crush resisteance long-torm in N/m: Zipcord||5000|
|Max. crush resisteance long-torm in N/m: Minizip (2×0,6)||2000|
|Min. bending radius in mm||25|
|Colour of outer jacket||orange|
|Weight in kg/km: Zipcord||14,5|
|Weight in kg/km: Minizip (2×0,6)||7,4|
|Operating temperature in °C||-5 / +55|
|Storage temperature in °C||-30 / +70|
|Installation temperature in °C||-5 / +50|
|Flame retardancy||IEC 60332-1|
|Halogen-free acc. to||IEC 60754-2|
نقد و بررسیها
هیچ دیدگاهی برای این محصول نوشته نشده است.